通過將電磁閥底座旋轉90°，電磁閥先導閥可以安裝在兩個可能的位置（圖1）。這是通過松開將電磁先導閥固定到閥體上的兩個M4pozi驅動螺釘來實現的。改變電磁閥先導位置時，應注意確保三角墊片密封到位。（圖2）


通過松開四個固定螺釘，線圈本身可以以90°的步幅旋轉。（圖3）旋轉線圈時，應注意確保芯組件（芯、彈簧、密封件和墊圈）保持完好并正確對齊。這很容易實現，只需提起線圈所需的少量螺釘，即可使線圈旋轉。

C15 - 1/4", BSP/NPT, Namur Mount, 3/2 or 5/2, Internal or External Pilot, Single or Dual SolenoidCompatiable with all safe and hazardous area solenoids. Material options: Aluminium, Stainless Steel or Brass

?

• Solenoid valve designed for direct mounting onto 1/4 turn pneumatically operated valve actuators meeting ‘NAMUR’ standard fixing dimensions.
• Valve is illustrated with an Exia coil.
• Body material available in Aluminium (standard), Stainless Steel, and Brass
• Seal kit available – VSKC15P

FEATURES

• Interchangeable CNOMO interface coil units, including various hazardous area options
• Integrated Exhaust to Sprint (ETS) feature in 3/2 position
• Top face air connection
• 1/4″ BSP mains air connection and 1/8″ BSP exhaust ports, also available in NPT ports
• Single coil spring return function or double coil stay put function
• Pilot exhaust dust caps fitted as standard
• Built in 3/2 to 5/2 function conversion facility for spring return and double acting actuators respectively
• SIL 2 Capable (De-energise to trip @ HFT=0) SIL 3 Capable (De-energise to trip @ HFT=1) when used in 3/2 mode

?

MATERIAL SPECIFICATIONS

?

VALVE SPECIFICATIONS