Center Certification & Testing International
Project Introduction
The three comprehensive test is a comprehensive test in which three environmental stresses of temperature + humidity + vibration are applied at the same time. The effect of the integrated environment can reflect the performance of the product in field use more realistically and practically, and it can expose the defects of the product more.
The application of a separate environmental stress on the product can excite the failure of the product, then the application of three different environmental stresses on the product can easily achieve 3-5 times the acceleration effect. At the same time, by synthesizing different environmental stresses, failures that cannot occur when individual stresses are applied can also be stimulated.
In the comprehensive test of simultaneous application of three stresses of temperature, humidity, and vibration, from the mechanism of failure, the temperature cycling product internally expands and contracts due to the difference in material expansion coefficient, and loosens at the joint. Humidity, moisture will invade through the gap, so that the friction coefficient of the joint and the connection is reduced. When vibration stress is applied, the resonance phenomenon of the product will occur with respect to a specific frequency. Through this repeated process of movement, moisture absorption, freezing, and resonance, new failure modes (caused by the greatly accelerated single-factor failure mode and the combined effect of the three factors combined) are made possible.
Application range
The three comprehensive tests of temperature, humidity and vibration are widely used in the complete machines and parts of aviation, aerospace, military, electrical, electronic and other products. 3. Comprehensive testing is an important test method that is indispensable to the whole process of product and material development, prototype testing, and product qualification testing.
Method Standard
Three comprehensive test standard references: GB/T2423.35, GB/T2423.36, IEC/EN60068-2-50; IEC/EN60068-2-51.
BSCI certification is an abbreviation of BusinessSocialComplianceInitiative, and Chinese is called business social standard certification. BSCI is an organization that advocates the business community to abide by social responsibility. At the same time, it is a non-profit organization.
CMA, the name is \"China Metrology Accreditation\", the abbreviation of \"China Metrology Accreditation\" in English. According to the provisions of Article 22 of the Metrology Law of the People’s Republic of China: “The product quality inspection agency that provides notarized data to the society must be evaluated by the metrological administrative department of the people’s government at or above the provincial level for the capability and reliability of metrological verification and testing. Qualified.\"
Laboratory accreditation is a third-party certification that CNAS has the ability to perform specific testing and calibration work for testing and calibration laboratories.
The three comprehensive test is a comprehensive test in which three environmental stresses of temperature + humidity + vibration are applied at the same time. The effect of the integrated environment can reflect the performance of the product in field use more realistically and practically, and it can expose the defects of the product more.
Get a quote
Tik Tok
